Loading... Please wait...

IMOD Combo Kit

  • IMOD Combo Kit, Black, Clubfoot
  • IMOD Combo Kit, Black, Standard
  • IMOD Combo Kit, Green, Clubfoot
  • IMOD Combo Kit, Green, Standard
  • IMOD Combo Kit, Tan, Clubfoot
  • IMOD Combo Kit, Tan, Standard
  • Rifle with a Foliage Green, Clubfoot IMOD
  • Short Barreled Rifle with a Black, Standard IMOD
  • Short Barreled Rifle with a Black, Clubfoot IMOD
  • Removable and Replaceable Buttpad
  • Short Barreled Rifle with a Tan, Standard IMOD

Product Description

New for 2010, the introduction of the Improved Modstock, appropriately named the “IMod”. Since 2002, the original Modstock has become well known and respected by Military, Law-Enforcement and sports shooters worldwide. Even though the Modstock is considered the best on the market, Vltor believed it was time for improvements. The improvements are subtle but necessary. Feedback from end users will make the IMod the choice over the competition.

When compared to the original Modstock, the IMod series is now available to fit either the Milspec or Commercial diameter receiver extension/buffer tube. Unfortunately, the IMod will not fit both receiver extensions, so when ordering, pick the correct item and part number.

Like all Vltor stocks, the IMod is available in the three most popular colors; Black, Flat Dark Earth (tan) and Foliage Green. As with the original Modstocks, the IMod is offered in the conventional, “Standard” configuration and the unconventional, “Clubfoot” configuration. Even though the Standard model is the most well-known model amongst the shooting public, the Clubfoot version is a hybrid model that bridges the gap between tactical and prone shooting positions. In other words, the Clubfoot portion of the stock allows the shooter, with his/her off hand, to support the stock and to control the rear of the weapon, while shooting in prone or rested position.

The improvements of the IMod are as follows: Integral, but removable non-slip buttpad (color matched to stock components)

  • Rolled/angled buttpad toe with wide traction area. This will assist in running the stock high on shoulder, making the IMod system more user friendly when using web-gear and/or body armor.
  • Improved lock paddle, making it easier to operate and making the contact surface non-slip when operating the lever.
  • Removed most sharp edges that may cause “snag points” to web-gear or other vital equipment.
  • Improved strength throughout construction of the stock chassis. This will provide maximum strength during “Mortaring exercise” or unexpected impact.
  • Integral, but removable non-slip buttpad (color matched to stock components)

All IMod Combo Kits come standard in Milspec dimension. In other words, all IMods will fit only Milspec diameter (1.150”) Receiver Extensions.

The IMod Combo Kit contains the following items:

  • IMod stock kit, with storage compartments.
  • Milspec Receiver Extension, Part# RE-1
  • Carbine Buffer (standard weight), Part# V2-1070-C2
  • Carbine/M4 Action Spring, Part# V2-1070-C1
  • Receiver End Lock Plate, Part# V2-1069-M1
  • Receiver End Lock Nut, Part# V2-1069-M2

Installation note: The installation of the IMod stock should only be performed by a qualified gunsmith and/or certified armorer.

IMOD at a glance:

Design Removable rubber buttpad and storage compartments. A true Modular buttstock for the AR15/M16/M4 carbine series.
Construction Impact and temperature resistant polymer, specially blended for Vltor. Metal components are either carbon steel or stainless steel (depending on the application)
Compatibility Milspec IMods will only fit receiver extensions/buffer tubes with the outer diameter of 1.150”, while Commercial IMods will only fit 1.170” diameter receiver extensions.
Weight - Nominal Less than 9.4 oz. (Milspec and Commercial with storage compartment and buttpad installed)

Length: 6.250” (without buttpad)
Length: 6.626” (with buttpad)
Width: 2.500” (with storage compartments installed)Height: 5.210” (with buttpad installed)

Color Finish All stocks have a matte (anti-reflection/glare) finish. IMods are only available in the following colors: Black, Flat Dark Earth (Tan) and Foliage Green. Foliage Green is more of a “grey” green versus Olive Drab.
Special Features

Storage capacity: Each side compartment can hold at least two AAs or three lithium CR123 3-volt batteries. The internal diameter of each compartment is 0.685”.

Sling mounting: All Modstocks, including the IMod will accept a push-button, quick detachable sling swivel or a conventional web sling, measuring up to 1.375” in width. ***Quick Detachable Sling Swivels are available through Vltor.

Find Similar Products by Category

Write your own product review

Product Reviews

  1. Nice Stock

    Posted by Unknown on 2nd Oct 2013

    Will buy this stock again perfect fit great color.

  2. Assembly and Use

    Posted by Scott Andrews on 7th May 2013

    Excellent quality materials, packaging was outstanding, which is rare in this industry. Very easy to assemble less than 5 minutes. Use is excellent great cheek weld; the window for the numbered position is a nice feature. Snaps in position is solid. The club foot makes for a nice shoulder pocket hold less pinch feels more stable. Battery pockets bilateral very handy for those of you needing them. Simply put an outstanding piece of equipment.

  3. Hands down the BEST collapsible out there.

    Posted by DBS on 31st Jul 2012

    I run three of them and every customer gets one unless they opt out. Buy one for everybody you know this year.

Add to Wish List

Click the button below to add the IMOD Combo Kit to your wish list.